What's New
Qoms1 Monopole Omni-Directional Hemispherical Source
- Lightweight 2 lbs (0.9 kg)
- 4.2" Diameter x 6.3" Height (106 mm x 160 mm)
- 1/3 Octaves: 50-16,000 Hz
- 109 dB Sound Power
- ISO 3382 / 16283
Sonascreen Acoustic Camera by Sonotec
- Leak Detection, Partial Discharge Localization, and Buzz, Squeak & Rattle
- Shifts Ultrasound to Audible Range for Listening on Headphones
- Adjustable Filters for Easier Source Location
- Up to 100 KHz Bandwidth
- Archiving and Reporting PC Software
- Well Priced
New Class 2 SVAN 973 Sound Level Meter
- Class 2
- MEMS Microphone with Lifetime Warranty
- Wide Frequency Range up to 10 kHz
- 1/1, 1/3 Octave and Audio recording
- RT60 Reverberation Time Measurement in 1/1 or 1/3 Octave
Continuous Oil Health Monitoring Sensor
- Continuous Healthy Monitoring
- Detects Ferrous Particles
- Suitable for Wide Deployment
- 4-20 mA, 0-10 V, or CAN Bus Outputs
- Compatible with Switches, Alarms, PLC's, and SCADAS
- Temperature and/or Dielectric Alerts
- Complements Periodic Oil Sampling Programs
Wideband Ultrasonic Analyzer
Unlike other devices that are tuned to a very narrow frequency range, the Sonaphone senses from 20 - 100 KHz. To more easily find the target among other sources and noise, display the live color spectrogram then graphically choose and listen to a single, a portion, or all frequencies.
Ono Sokki FT-2500 FFT Tachometer
- Calculates RPM from FFT
- Works with Almost Any Periodic Signal
- No Reflective Markers Required
- DC Analog and Pulse Outputs
- IEPE and 12 VDC Sensor Power
- Go/No Go Comparator Functionality
GRAS RA040x High Resolution Ear Simulator
- Improved repeatablility above 10 kHz
- 10 Hz to 20 kHz the response is within ± 2.2 dB
- 13.5 kHz resonance dampened by approximately 14 dB
- Upgraded IEC 60318-4 ear simulator - same form factor
- Backwards compatible with standard IEC 60318-4 (711) ear simulator
GRAS 47HC IEPE Low Noise Microphone
- IEPE Powered
- Common BNC Connector
- 6.5 dB(A) Noise Floor
- 6 Hz - 20 kHz Range (+/-3 dB)
- Standard 1/2" Size
- TEDS
Battery Testing Application Note
This app note introduces a simple and inexpensive method of simultaneously monitoring and recording voltage, current, temperature, humidity and other metrics related to battery testing.